Make your slab, cut it into loaves, then cut multiple bars at once
If you're ready to take your soap making to the next level, this combo gives you three key tools for making, dividing and cutting your soap efficiently.
 
The Slab / Loaf Soap Mould gives you a sturdy, reusable mould for creating your soap slab. The Standard Slab / Loaf Cutter helps divide the slab into clean, even loaves, while the Multi Cutter, Slim Line allows you to cut multiple bars from your loaves at once.
 
Together, they give you a practical setup for working with larger batches and producing more consistent finished bars.
 
This combo is particularly useful for soap makers who are producing multiple bars of the same size and want to make the cutting process quicker and more consistent.
 
Why buy the combo?
 
Make a larger slab
Choose from three mould sizes to suit your batch size and workspace.
 
Cut with more consistency
The adjustable Slab / Loaf Cutter helps divide your finished slab into even sections.
 
Cut multiple bars at once
The Multi Cutter, Slim Line is designed to cut multiple bars in a single cut, helping you work through larger batches more efficiently.
 
Keep your process consistent
Using the same mould and cutters from batch to batch makes it easier to repeat the sizes you want.
Choose your mould size
 
All moulds have an internal depth of 9 cm.
 
Small, 20 × 20 × 9 cm
Approximate internal volume: 3.60 kg
A manageable option for makers wanting to try slab-style soap making.
 
Medium, 26 × 26 × 9 cm
Approximate internal volume: 6.08 kg
A versatile option for larger batches while remaining practical for many workspaces.
 
Large, 30 × 30 × 9 cm
Approximate internal volume: 8.10 kg
The largest standard option for larger slab batches and designs.
 
Volume capacities are calculated from the internal mould dimensions and represent maximum internal volume. Actual soap batter capacity will depend on your recipe and how much space you leave when filling the mould.
 
What's included?
1 × Standard Slab / Loaf Soap Cutter
1 × Slab / Loaf Soap Mould, in your choice of Small, Medium or Large
1 × Multi Cutter, Slim Line
 
The Slab / Loaf Soap Mould
Made from pine and designed for practical use in the soap-making workshop.
It features:
Hinged sides along the long edges for easier opening
Long screw and butterfly screws on the short sides
Handles for easier lifting and carrying
Food-grade timber oil on the internal walls and base
Untreated exterior for easier liner taping
Fully oiled lid, inside and out
 
The mould must be lined before use. Silicone liners are not available.
 
The Standard Slab / Loaf Cutter
The adjustable cutter gives you greater control over the size of your cuts.
It features:
Acrylic height guides
Adjustable cutting height
Steel cutting wire
Wire-tightening key
Spare cutting wire included
 
Suitable for cold process and hot process soap. Not suitable for Melt & Pour.
The soap must be freshly unmoulded and soft enough to cut. Hard soap can damage the cutter or break the wire.
 
The Multi Cutter, Slim Line
The Multi Cutter, Slim Line is designed to cut multiple soap bars at the same time, making it particularly useful for makers producing larger quantities.
It features:
12 cutting wires
11 bars per cut
2.5 cm wire spacing
Maximum soap height of 13 cm
Marine plywood and HDPE construction
Wire storage built into the HDPE base
 
The Slim Line measures approximately 42 cm long × 32 cm wide, including the keys.
 
The cutter is designed for cold process and hot process soap and is not suitable for Melt & Pour soap.
 
The soap should be freshly unmoulded and soft enough to cut. Hard soap can damage the cutter or break the wires.
 
Frequently Asked Questions
 
What do I get in this combo?
You receive one Standard Slab / Loaf Soap Cutter, one Slab / Loaf Soap Mould in your choice of Small, Medium or Large, and one Multi Cutter, Slim Line.
 
What is the difference between the other combos and this one?
This combo is designed for makers who want to produce multiple bars efficiently.
The Slab / Loaf Cutter divides your slab into loaves, then the Multi Cutter, Slim Line cuts multiple bars from those loaves at the same time.
 
Which mould size should I choose?
The choice depends on your usual batch size and available workspace. The Small, Medium and Large moulds have approximate internal volumes of 3.60 kg, 6.08 kg and 8.10 kg respectively.
 
Can I add a divider kit?
Yes. Divider kits are available separately and allow you to create multiple sections within the mould.
 
Can I use the cutters with Melt & Pour soap?
No. The cutters are designed for cold process and hot process soap.
 
Does the mould need to be lined?
Yes. The mould must be lined before pouring soap batter. Silicone liners are not available.
 
Does the mould come with a lid?
Yes. The matching lid is included.
 
A complete setup for larger batches
 
This combo gives you the three essential pieces of equipment needed to mould, divide and cut your soap into multiple bars.
 
Make your slab, unmould it, divide it into loaves with the Slab / Loaf Cutter, then use the Multi Cutter, Slim Line to cut multiple bars at once.
 
A practical setup for soap makers who want to work more efficiently with larger batches while maintaining consistent bar sizes.
 
MORE INFORMATION AVAILABLE ON THE ITEMS' INDIVIDUAL PAGES