SLAB/LOAF CUTTER
Cold / Hot process adjustable soap slab cutter.  
Adjustable Slab Soap Cutter/Log Splitter made of wood (Pine) and acrylic parts.
Acrylic height guide one side from 2.5cm to 9.5cm and other side 2cm to 10cm.
Stainless steel cutting wire and tightening key.
*Not suitable for Melt & Pour
 
*Standard product's base is 400mm base
 
*New Special Make 400mm base with added HDPE to the base for smoother soap movement..
 
*New Special Make made for larger soap slabs.
    New base 600mm in length
    HDPE piece added to the base for smoother soap movement.
 
All Cutter wood has been coated with Food Grade Timber Oil.
All Cutters are supplied with spare wire.
Delivery available Australia and New Zealand.
*Stock made to order.
*We can also custom make for Left Hand on request
**Extra wire packs available for purchase
 
Note: 
(1) The soap must be freshly unmoulded for this tool to work successfully, if the soap is hard you will experience difficulty in getting the wire through and may break.
 
(2) As guitar keys are used to hold the wire in place, these are not a permanent hold. The wire will lose tension each time the tool is used, therefore, please check the tension before each use. Special care must be taken, as this tool is for the cutting of soft soap, not firm soap, as firm or tool hard may cause damage of the tool and the loss of wires.
 
(3) Ensure the wire height is measured from the outside & inside to the two "arms" whre the soap will glide for the cutting process - ensure the height of the wire is correct to your specific requirement. When tools are is shipped, the wire is not at a specific height, as each user has their own specific need - it is the purchaser's responsabilty to ensure the wire is adjusted prior to cutting the soap slab/loaf.
 
Cleaning:
Only use rubbing alcohol and a cloth/microfiber
Do Not Use Water
Keep dry