Speed Up Your Soap Cutting with the Multi Bar Cutter
Cut 10 perfectly sized bars in one go with this tool, designed for both hot and cold process soaps. Each bar measures about 2.5 cm wide, helping you save time and keep your batches consistent every time.
 
(a) The Base
Made from recycled plywood
Internal dimensions: 26.3 cm (L) × 12 cm (W) × 7.5 cm (H)
Helps guide the wire cleanly through the soap for a smooth finish
Built-in wire guides for better cutter alignment
 
(b) The Wire Cutter
Independent from the base for easy cleaning
Made from Tasmanian Oak hardwood or Merbau (depending on availability)
9 wires, glued and screwed for strength
Replacement wire supplied
 
Not suitable for Melt and Pour soap.
 
All wooden parts are coated with three coats of food-grade timber oil. Cutters are supplied with a spare wire, and extra wire packs are available for purchase.
Stock is made to order.
 
Important Notes
Soap must be freshly unmoulded. Hard or cured soap can damage the tool or break the wires.
Guitar keys hold the wires in place but lose tension with use. Check wire tension before every cut. This tool is for soft soap only.
Special-make cutters are non-returnable and non-refundable.
 
Cleaning
Wipe with rubbing alcohol and a soft cloth or microfiber
Do not use water
Keep dry