Make your slab, cut it into loaves, then cut your loaves into bars
If you're ready to take your soap making to the next level, this combo gives you three key tools for making, dividing and cutting your soap.
 
The Slab / Loaf Soap Mould gives you a sturdy, reusable mould for creating your soap slab. The Standard Slab / Loaf Cutter helps divide the slab into clean, even loaves, while the Single Bar Soap Cutter allows you to cut those loaves into individual bars.
 
Together, they give you a practical setup for working with larger batches and creating more consistent finished soap.
 
Why buy the combo?
Make a larger slab
Choose from three mould sizes to suit your batch size and workspace.
 
Cut with more consistency
The adjustable Slab / Loaf Cutter helps divide your finished slab into even sections.
 
Cut your loaves into bars
The Single Bar Soap Cutter lets you cut your loaves into individual bars with adjustable bar width.
 
Keep your process consistent
Using the same mould and cutters from batch to batch makes it easier to repeat the sizes you want.
Choose your mould size
 
All moulds have an internal depth of 9 cm.
 
Small, 20 × 20 × 9 cm
Approximate internal volume: 3.60 kg
A manageable option for makers wanting to try slab-style soap making.
 
Medium, 26 × 26 × 9 cm
Approximate internal volume: 6.08 kg
A versatile option for larger batches while remaining practical for many workspaces.
 
Large, 30 × 30 × 9 cm
Approximate internal volume: 8.10 kg
The largest standard option for larger slab batches and designs.
 
Volume capacities are calculated from the internal mould dimensions and represent maximum internal volume. Actual soap batter capacity will depend on your recipe and how much space you leave when filling the mould.
 
What's included?
1 × Standard Slab / Loaf Soap Cutter
1 × Slab / Loaf Soap Mould, in your choice of Small, Medium or Large
1 × Single Bar Soap Cutter
 
The Slab / Loaf Soap Mould
Made from pine and designed for practical use in the soap-making workshop.
It features:
Hinged sides along the long edges for easier opening
Long screw and butterfly screws on the short sides
Handles for easier lifting and carrying
Food-grade timber oil on the internal walls and base
Untreated exterior for easier liner taping
Fully oiled lid, inside and out
 
The mould must be lined before use. Silicone liners are not available.
 
The Standard Slab / Loaf Cutter
The adjustable cutter gives you greater control over the size of your cuts.
It features:
Acrylic height guides
Adjustable cutting height
Steel cutting wire
Wire-tightening key
Spare cutting wire included
 
Suitable for cold process and hot process soap. Not suitable for Melt & Pour.
The soap must be freshly unmoulded and soft enough to cut. Hard soap can damage the cutter or break the wire.
 
The Single Bar Soap Cutter
Designed for cutting individual bars from your freshly cut soap loaves.
It features:
Adjustable bar width
Tasmanian hardwood base
Plywood cutting arm
Food-grade HDPE cutting base
Steel cutting wire
Wire-tightening key
Spare cutting wire included
 
Suitable for cold process soap and not suitable for Melt & Pour.
The soap should be freshly unmoulded and soft enough to cut. Hard soap can damage the cutter or break the wire.
 
Frequently Asked Questions
 
What do I get in Combo 2?
You receive one Standard Slab / Loaf Soap Cutter, one Slab / Loaf Soap Mould in your choice of Small, Medium or Large, and one Single Bar Soap Cutter.
 
What is the difference between Combo 1 and Combo 2?
Combo 1 includes the Slab / Loaf Soap Mould and Standard Slab / Loaf Cutter.
Combo 2 includes those two items plus the Single Bar Soap Cutter, giving you a complete setup from slab to individual bar.
 
Which mould size should I choose?
The choice depends on your usual batch size and available workspace. The Small, Medium and Large moulds have approximate internal volumes of 3.60 kg, 6.08 kg and 8.10 kg respectively.
 
Can I add a divider kit?
Yes. Divider kits are available separately and allow you to create multiple sections within the mould.
 
Can I use the cutters with Melt & Pour soap?
No. The cutters are designed for cold process and hot process soap.
 
Does the mould need to be lined?
Yes. The mould must be lined before pouring soap batter. Silicone liners are not available.
 
Does the mould come with a lid?
Yes. The matching lid is included.
 
A complete setup from slab to bar
 
Combo 2 gives you the three essential pieces of equipment needed to mould, divide and cut your soap.
 
Make your slab, unmould it, divide it into loaves with the Slab / Loaf Cutter, then cut those loaves into individual bars with the Single Bar Soap Cutter.
 
A practical setup for soap makers who want a more consistent process from moulding through to finished bars.
 
MORE INFORMATION AVAILABLE ON THE ITEMS' INDIVIDUAL PAGES