MULTI BAR CUTTER 
This product has been designed for Hot / Cold Process Soap and can produce 10 Bars per cut. Each bar at 2.5cm (1 inch).
   (a) The Base: 
• Made of Recycled Plywood measures (internal dimensions) L26.3cm x W12cm x H7.5cm
• Designed to assist the wire to cut through the soaps bottom, leaving a clean finish.
• In built wire guides to assist you with cutter alignment. 
   (b)The Wire Cutter:
• Totally independent for easy clearing of both base/cutter.
• Tasmanian Oak Hardwood / Merbau - which ever is available at the time of order processing
• 9 Wires
All joints have been glued & screwed.
Replacement wire supplied.

*Not suitable for Melt & Pour
 
All Cutter wood has been coated with three coats of food grade Timber Oil.
All Cutters are supplied with spare wire.
 
*Stock made to order.
**Extra wire packs available for purchase
 
Note: 
(1) The soap must be freshly unmoulded for this tool to work successfully, if the soap is hard you will experience difficulty in getting the wire through and may break.
 
(2) As guitar keys are used to hold the wire in place, these are not a permanent hold. The wire will lose tension each time the tool is used, therefore, please check the tension before each use. Special care must be taken, as this tool is for the cutting of soft soap, not firm soap, as firm or tool hard may cause damage of the tool and the loss of wires.
 
(3) Before proceeding to purchase Special Make cutter, please be aware that no returns will be accepted, hence, no credits.
 
Cleaning:
Only use rubbing alcohol and a cloth/microfiber
Do Not Use Water
Keep dry